Table of Contents
Advertisement
3-10
3-11
I-Ref resh
3-12
3-13
3-14
3-15
3-16
3.5.4 "I-Refresh" button
Touch this button (Fig. 3-10) , the program can be sele-
cted, I-refresh icon will light up. It is used for fresh odor
removal, dust removal, mites removal, and moisture re-
moval.
3.5.5 "Dry" button
Touch this button (Fig. 3-11) in order to activate/deacti-
vate the drying function. By touching the button sequen-
tially, drying time can be seen in combination with pro-
gram Dry this function sets the drying time.The time
is AU、30、60、90min.
3.5.6 "Steam" button
Touch this button (Fig 3-12) to select the steam program,
then the current program temperature value will be cha-
nged to the maximum allowed value. The maximum te-
mperature value can be viewed on the page of the par-
ameters table in the manual. You can select if you requ-
ire this funtion when programmers "Cotton, Synthetics,
Mix, Baby care, Daily, Hygiene, Jeans" are used. The
icon will light up when using the steam wash function.
3.5.7 "Start/Pause" button
Touch this button (Fig. 3-13) gently to start or pause
the wash cycle.
3.5.8 Child lock
Touch button "Delay" and "Steam" (Fig. 3-14) for 3
seconds simultaneously to activate the child lock
feature. The child lock indicator on the display will
light up when it's activated. Press the two buttons
simultaneously again to deactivate the feature.
This feature is an optional when the machine is running.
The display showing "clol-" (Fig. 3-15) if the child
lock is activated. This feature is to disable controls
and prevent child from changing programme or
operating the appliance.
3.5.9 Extra Rinse
Touch button "Steam" and "Temp." (Fig. 3-16) for 3
seconds simultaneously to activate the Extra Rinse,
press these two buttons at the same time to adjust
the times of extra rinse.
3-Control panel
10
Advertisement
Table of Contents
