Pioneer AVH-P5750DVD/RC Service Manual page 144

1
2.2 Operation specification
Touch the outermost circumference of screen, and take outermost circumference value of X, Y.
A
Press [ENT] key of main unit or remote control unit to finish adjustment.
After finishing adjustment, if a taken value is within permissible zone, enter [O.K] at the center, and if it is outside
permissible zone, enter [NG] at the center.
Then, press [ENT] key of main unit or remote control unit to return to TOP MENU.
2.3 Processing detail
Press [ENT] key of main unit or remote control unit to finish adjustment and store setting value (maximum and minimum
value) to EEPROM only when the taken value is within permissible zone.
Receive confirmation screen TP and display OK or NG after fulfilling the following conditions:
[O.K] is displayed after storing a taken value to EEPROM.
B
[NG] is displayed when a taken value is determined to be outside permissible zone.
Default is showed below.
Coordinates Minimum
X
Y
2.4 Additional information
Consider diameter of the top of jig (pen tip) before adjusting outermost circumference.
C
Out-of-alignment length
Perform calibration data operation with the size calculated
by subtracting out-of-alignment length from
permissible screen area.
D
E
F
144
1
2
Maximum
58 248
64 241
0.8 mm
AVH-P5750DVD/RC
2
3
pen tip for adjustment (zoom in)
out-of-alignment length
permissible screen area
3
4
4