Biostar NF325-A9 Instruction Manual page 50

NF325-A9 BIOS SETUP
Row precharge Time (Trp)
This field specifies the Row precharge Time.
Auto-Refresh of the same bank. Typically 20-24 Nsec.
The Choices: Auto (default), 2 BUS CLOCKS, 3 BUS CLOCKS, 4 BUS
CLOCKS, 5 BUS CLOCKS, 6 BUS CLOCKS.
Bottom of 32-bit [31:24]IO
The Choices: 00 (default).
S/W memory hole Remapping
This item allows you to enabled or disabled S/W memory hole Remapping.
The Choices: Disabled (default), Enabled.
H/W memory hole Remapping
This item allows you to enabled or disabled H/W memory hole Remapping.
The Choices: Disabled (default), Enabled.
MTRR mapping mode
This field specifies the MTRR mapping mode.
The Choices: Continuous (default).
CPU OverClock in MHz
This item allows you to select CPU OverClock in MHz.
The Choices: 200 (default), 201, 202, 203, 204, 205, 206, 207.
AGP OverClock in MHz
This item allows you to select AGP OverClock in MHz.
The Choices: 66 (default), 67, 68, 69, 70, 71, 72, 73.
AGP Aperture Size
Select the size of the Accelerated Graphics Port (AGP) aperture. The aperture is a
portion of the PCI memory address range dedicated for graphics memory address
space. Host cycles that hit the aperture range are forwarded to the AGP without
any translation.
The Choices: 256M, 128M (default), 64M, 32M, 16M, 8M, 4M.
AGP 3.0 Speed
This item allows you to select AGP 3.0 Speed.
The Choices: Auto (default).
AGP 2.0 Speed
This item allows you to select AGP 3.0 Speed
The Choices: Auto (default), 1x, 1x2x, 1x2x4x.
Precharge to Active or
16