Biostar NF325-A9 Instruction Manual page 4

On Board IDE
Supports 4 IDE disk drives.
Supports PIO mode 0~4, Block Mode and Ultra DMA
33/66/100/133 bus master mode.
Slots
Five 32-bit PCI bus master slots.
One AGP 8x slot
System Memory
Supports Dual Channel DDR-333/400.
Supports 8 banks in total.
Supports 256-Mb, 512-Mb, or 1G-Mb DDR technologies for x8
and x16 non-ECC DDR devices.
Certified DDR400 List:
­
Please check the website:
http://www.biostar.com.tw/products/mainboard/board.php3?
name=NF325-A9
Maximum memory size is 4GB.
DIMM Socket
Location
DIMM1
DIMM2
DIMM3
DIMM4
DDR Installation Notice :
Please follow the table below to install DDR memory module, or
the system may not boot up or may not function properly.
"SS" represents Single Side DDR memory module.
"DS" represents Double Side DDR memory module.
Star sign "*" represents leave the DIMM socket empty.
setup1
DIMM1 SS/DS
DIMM2
*
DIMM3
*
DIMM4
*
NF325-A9
DDR Module
128MB/256MB/512MB/1GB *1
128MB/256MB/512MB/1GB *1
128MB/256MB/512MB/1GB *1
128MB/256MB/512MB/1GB *1
64bit
setup2 setup3
SS/DS
*
* *
SS/DS SS/DS
* *
2
Total Memory
Size (MB)
Max is 4 GB.
128bit
setup1 setup2 setup3
SS/DS SS/DS
*
SS/DS SS/DS
*
SS/DS SS/DS
*
SS/DS SS/DS
*