Care And Maintenance; Upgrading Your Software And Firmware - Kodak EasyShare M341 Extended User Manual

Video output—NTSC or PAL
Microphone—Yes
Speaker—Yes
PICTBRIDGE support—Yes
Power—KODAK Li-Ion Rechargeable Digital Camera Battery KLIC-7001; KODAK
5-Volt AC adapter; USB charging
Tripod mount—1/4 inch
Size—95.5 x 58.5 x 19.2 mm (3.8 x 2.3 x 0.8 in.) @ power off
Weight—115 g (4.1 oz) without card or battery
Operating temperature—0–40 degrees C (32–104 degrees F)

Care and maintenance

■ If you suspect water has gotten inside the camera, remove the battery and card.
Allow all components to air-dry for at least 24 hours before using the camera.
■ Blow gently on the lens or LCD to remove dust and dirt. Wipe gently with a soft,
lint-free cloth or an untreated lens-cleaning tissue. Do not use cleaning solutions
unless designed specifically for camera lenses. Do not allow chemicals, such as
suntan lotion, to contact painted surfaces.
■ Service agreements may be available in your country. Contact a dealer of KODAK
Products for more information.
■ For digital camera disposal or recycling information, contact your local authorities.
In the US, visit the Electronics Industry Alliance Web site at
www.kodak.com/go/m341support.

Upgrading your software and firmware

Download the latest versions of the software included on the KODAK EASYSHARE
Software CD and the camera firmware (the software that runs on the camera). Visit
www.kodak.com/go/m341downloads.
www.kodak.com/go/support
Appendix
www.eiae.org or
49