Table of Contents
Advertisement
Problem
Cause
Picture is too
Flash is not on, or the
dark or
subject was too far
underexposed.
away for the flash to
be effective.
Auto exposure was
not achieved.
Not enough light.
The camera
The card may not be
does not
SD/MMC certified.
recognize
The card may be
SD/MMC card.
corrupt.
Card is not properly
inserted in camera.
Camera freezes
Camera detects an
up when a card
error when the card is
is inserted or
inserted or removed.
removed.
Memory card
Image storage is full. Insert a new card
full
The maximum
number of files or
folders is reached (or
other directory
concern).
www.kodak.com/go/support
Solution
Move so there is no more than 11.8 ft (3.6
m) between the camera and the subject; 6.9
ft (2.1 m) in Telephoto.
To take the best possible pictures, press the
Shutter button halfway and hold. When
the ready light glows green, press the
Shutter button the rest of the way down
to take the picture.
Increase Exposure Compensation
Purchase a certified SD/MMC card.
Reformat the card
(page
Caution: Formatting deletes all pictures and
videos, including protected files.
Insert a card into the slot, then push to seat
(page
7).
Turn the camera off, then back on.
Make sure the camera is off when inserting
or removing a card.
(page
(page
39), or delete pictures
Transfer pictures and videos to the
computer, then format the card or internal
memory
(page
22).
Caution: Formatting a card deletes all
pictures and videos, including protected
files.
Troubleshooting
(page
18).
22).
7), transfer pictures
(page
25).
45
Hide quick links:
Advertisement
Table of Contents
