Kodak DCS 620 Supplementary Manual page 2

General guidelines for using the
SB-28D/SB-28DX Speedlight with
your DCS 600 Series camera:
1 Use the Sub-Command dial, not
the lens aperture ring, to set
aperture.
Using the Sub-Command dial
assures that the Speedlight
receives the lens aperture setting.
2 Set Flash mode to Auto Aperture.
A
ISO
0.6 0.8
ZOOM
ZOOM MODE
FLASH
1 1.5 2 3 4 6 9 13 18 m
STBY
mm
SEL
ON / OFF
TTL auto flash is NOT
recommended.
3
The automatic exposure control
range of the SB-28DX Speedlight
is partially determined by the
selected ISO speed on the
camera. Closer subjects may
require lower ISO settings. The
following table specifies the
widest aperture recommended
for each camera's minimum ISO:
DCS 620X
DCS 620
DCS 660
For the lens focal length and
4
aperture in use, make sure your
subject is within the distance
indicated on the Speedlight's LCD
panel.
Minimum Maximum
ISO Aperture
400 f4
200 f2.8
80 f2.8