Troubleshooting
This section should help you resolve any problems which you may
encounter when using your DC50 zoom camera. If you still have
trouble with your camera after reading this information, refer to the
"Getting Help" section.
Problems and Solutions
LCD Display Does Not Appear
The camera is not on.
The camera is in power
save mode.
The batteries are low,
empty, or not installed.
The batteries are not
installed correctly.
The power adapter was
disconnected from the
camera while the camera
was still on.
66
Cause
Solution
Pull the sliding cover away from the
camera to turn it on.
Press any button to activate ("wake")
the camera.
Replace the batteries or use a
power adapter.
Reinstall the batteries.
For information about installing
batteries, refer to the Using the
Camera section.
Plug the power adapter back into the
camera, turn the camera on and then
off again, and then disconnect the
power adapter from it.
January 1996