Formatting a PC Card
There can only be one PC Card in the camera when you format a card. This is a safety
feature to prevent formatting the wrong card. You can format a card using either the Quick
Format or the Full Format feature.
IMPORTANT:
Quick format, while faster, is not recommended if there is a possibility that the data on
the card is corrupted.
1
Select the Menu icon, then
choose Main Menu (page 5).
2
Select Card from the Main
menu.
The Card menu appears.
3
Choose Quick Format or Full
Format.
If two cards are in the camera,
you are prompted to remove the
inactive card. For example, if
CARD0 is active, you are
prompted to remove CARD1.
Remove the inactive card, then
select Retry.
If you remove the active card,
the message at the left appears:
Re-insert the card in the proper
slot, then select Retry.
4
Proceed with formatting as
described in chapter 4 of the
User's Manual.
10