Dell Vostro 420 Service Manual page 6

Back to Contents Page
Chassis Support Bracket
Dell™ Vostro™ 420/220/220s Service Manual
Removing the Chassis Support Bracket
Replacing the Chassis Support Bracket
CAUTION:
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION:
Removing the Chassis Support Bracket
NOTE: Only the Vostro 220s includes a chassis support bracket. You must remove the bracket before you can remove or replace many of the computer
components.
1. Follow the procedures in
2. Remove the computer cover (see
3. Remove the screw that secures the chassis support bracket.
4. Rotate the flange away from the back of the computer.
5. Disengage any cables stored in the cable clip at the top of the support bracket.
6. Lift the end of the support bracket at the back of the computer.
7. Slide the tabs at the other end of the bracket out of the slots in the chassis, and remove the bracket out of the computer.
Vostro 220s
1 chassis support bracket
3 screw
5 tabs (2)
Great user manuals database on
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
To guard against electrical shock, always unplug your computer from the electrical outlet before removing the cover.
Before Working on Your Computer.
Removing the Computer
2
4
6
UserManuals.info
Cover).
flange
cable clip
slots (2)