Entering The System Setup Program; System Setup Program Screens - Dell Vostro 420 Service Manual

Back to Contents Page
System Setup Program
Dell™ Vostro™ 420/220/220s Service Manual
Overview
Entering the System Setup Program
System Setup Program Screens
System Setup Program Options
Boot Sequence
Clearing Forgotten Passwords
Clearing CMOS Settings
BIOS
Overview
Use the system setup program as follows:
To change the system configuration information after you add, change, or remove any hardware in your computer
l
To set or change a user-selectable option such as the user password
l
To read the current amount of memory or set the type of hard drive installed
l
Before you use the system setup program, it is recommended that you write down the system setup screen information for future reference.
NOTICE:
incorrectly.
Entering the System Setup Program
1. Turn on (or restart) your computer.
2. When the blue DELL™ logo is displayed, you must watch for the F2 prompt to appear.
3. Once this F2 prompt appears, press <F2> immediately.
NOTE: The F2 prompt indicates that the keyboard has initialized. This prompt can appear very quickly, so you must watch for it to display, and then
press <F2>. If you press <F2> before you are prompted, the computer cannot acknowledge the keystroke.
4. If you wait too long and the operating system logo appears, continue to wait until you see the Microsoft® Windows® desktop. Then, shut down your
computer (see
System Setup Program Screens
The system setup program screen displays current or changeable configuration information for your computer. Information on the screen is divided into three
areas: the options list, active options field, and key functions.
Options List — This field appears on the left side of the system setup program window. The field
is a scrollable list containing features that define the configuration of your computer, including
installed hardware, power conservation, and security features.
Scroll up and down the list with the up- and down-arrow keys. As an option is highlighted, the
Option Field displays more information about that option and the option's current and available
settings.
Great user manuals database on
Unless you are an expert computer user, do not change the settings for this program. Certain changes can make your computer work
Turning Off Your Computer) and try again.
UserManuals.info
Option Field — This field contains information about each
option. In this field you can view your current settings and
make changes to your settings.
Use the right and left arrow keys to highlight an option.
Press <Enter> to make that selection active.