Dell Inspiron 9400 Service Manual page 25

Hide thumbs Also See for Inspiron 9400:

Table of Contents

1 display panel

4 grounding wire and captive screw

CAUTION:

NOTICE:

panel) on the computer.

NOTICE:

computer.

1. Follow the instructions in

2. Remove the display assembly (see

3. Remove the display bezel (see

4. Loosen the captive ground screw that attaches the display-panel ground wire to the display back cover.

5. Remove the eight M2 x 3-mm screws (four on each side of the display panel).

6. Lift the display panel out of the display back cover.

7. Press in both sides of the top flex-cable connector, and pull the top flex-cable connector away from the display connector.

8. Use the pull-tab to disconnect the bottom flex-cable connector from the inverter connector.

1 pull-tab on bottom flex-cable

connector

4 inverter connector

Great user manuals database on

2 M2 x 3-mm screws (8)

Before you begin the following procedure, see the safety instructions in the Product Information Guide.

To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by touching an unpainted metal surface (such as the back

To help prevent damage to the system board, remove the main battery (see

Before Working Inside Your

Removing the Display

2 top flex-cable

connector

UserManuals.info

3 display back cover

Before Working Inside Your

Computer.

Assembly).

Bezel).

3 display cable

connector

Computer) before working inside the

Table of Contents