Dell Inspiron 9400 Service Manual page 21

5. Remove the hinge cover (see
6. Use the pull-tab to disconnect the display cable from the system board, and then disengage the display cable from the cable channel.
7. Remove the four M2.5 x 5-mm screws (two on each side) that connect the display to the computer base.
1 display cable in cable channel
1 Mini-Card antenna cables
NOTICE:
8. Lift the display assembly away from the computer.
Replacing the Display Assembly
1. Thread the Mini-Card antenna cables back through the hole in the base of the computer so that they are accessible from the bottom of the computer.
Great user manuals database on
Removing the Hinge
2 display cable pull-tab
When removing the display assembly, carefully unthread the Mini-Card antenna cables through the computer base.
UserManuals.info
Cover).
3 M2.5 x 5-mm screws (4)