Replacing The Palm Rest - Dell Studio 1450 Service Manual

CAUTION:
14. Lift the palm rest off the computer base.
Replacing the Palm Rest
1. Follow the instructions in
2. Route the following cables through the palm rest and connect them to the corresponding connectors on the system board:
power button cable
l
battery indicator cable
l
speaker module cable
l
touch pad cable
l
display cable
l
camera/microphone
l
3. Align the palm rest with the computer base and gently snap the palm rest into place.
4. Replace the four screws on the top of the palm rest.
5. Turn the computer over.
6. Replace the ten screws on the computer base.
7. Replace the keyboard (see
8. Replace the hard drive (see
9. Replace the Mini-Cards, if applicable (see
10. Replace the memory modules (see
11. Replace the base cover (see
12. Replace the battery (see
13. Replace any removed cards in the ExpressCard slot or 8-in-1 Media Card Reader.
Back to Contents Page
Great user manuals database on
Carefully separate the palm rest from the computer base to avoid damage to the palm rest.
Before You Begin.
Replacing the Keyboard).
Replacing the Hard Drive).
Replacing the
Replacing the Memory
Replacing the Base Cover).
Replacing the Battery).
UserManuals.info
Mini-Card).
Module(s)).