Removing The System Board - Dell Inspiron 1011 Service Manual

Back to Contents Page
System Board
Dell™ Inspiron™ 1011 Service Manual
Removing the System Board
Replacing the System Board
Entering the Service Tag in the BIOS
WARNING:
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION:
surface.
CAUTION:
is not covered by your warranty.
CAUTION:
computer.
Removing the System Board
1. Follow the instructions in
2. Remove the battery (see
3. Remove the Mini-Card (see
4. Remove the keyboard (see
5. Remove the palm rest (see
6. Remove the hard drive (see
7. Remove the palm rest bracket (see
8. Disconnect the USB and SIM card board cable, AC adapter connector cable, and display cable from their respective system board connectors.
9. Remove the two screws that secure the system board to the computer base.
1 AC adapter cable connector
3 screws (2)
5 system board
10. Lift the system board and turn it over.
Great user manuals database on
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™
To help prevent damage to the system board, remove the main battery (see
Before You Begin.
Removing the Battery).
"Removing the Mini-Card" on page 34).
Removing the Keyboard).
Removing the Palm Rest).
Removing the Hard Drive).
Removing the Palm Rest
2 USB and SIM card cable connector
4 display cable connector
UserManuals.info
Removing the
Bracket).
Battery) before working inside the