Blind-Spot Collision Warning (Bcw) - Hyundai Tucson 2023 Owner's Manual

Driver Assistance System
Blind-Spot Collision Warning
Settings
Blind-Spot Safety
With the ignition switch ON, go to User
Settings > Driver Assistance > Blind-
Spot Safety (for cluster type) or Setup >
Vehicle > Driver Assistance > Blind-Spot
Safety (for infotainment system type)
from the Settings menu to select the
following:
If Warning Only is selected, Blind-
Spot Collision Warning only displays
a warning message and sounds an
audible warning depending on the
collision risk level. The function does
NOT brake your vehicle to help avoid
a collision.
If Off is selected, Blind-Spot Collision
Warning turns off.
7-32
If you change the setting from Off to
Warning Only, the warning lights on the
side view mirrors blink for three seconds.
OTM070202N
In addition, if the engine is turned on
when the function is set to Warning
Only, the warning lights on the side view
mirrors blink for three seconds.
When the engine is restarted with the
function off, the "Blind-Spot Safety
is Off" message may appear on the
instrument cluster.
WARNING
If Off is selected, the function does NOT
warn you to help avoid a collision.
Information
When the engine is restarted, Blind-
Spot Collision Warning maintains its last
setting.
Information
You can change the Warning Timing
and Warning Volume settings or select
Driving Safety Priority for Blind-Spot
Collision Warning from the Settings
menu. For more information, refer to
the "Driver Assistance System Settings"
section in this chapter.
OTM070097N