Reference Manual
00809-0100-4021
Configure Transmitter Sensor Matching in guided setup
The guided setup will take you through the complete sensor configuration. This document
will guide you through the specific Transmitter Sensor Matching section.
Procedure
1. From the Home screen, select 2 Configure.
2. Select 1 Guided Setup.
3. Select 1 Configure Sensors.
4. When prompted, select 1 Configure Sensor 1. If you are using dual RTDs, you may
Reference Manual
also select 2 Configure Sensor 2, or 3 Configure Both Sensors the Same.
HART Commissioning
December 2019
141