1.4 Specifications
AC Adaptor Selection
You must connect an additional AC adaptor in any of the following conditions:
•
A total of more than 4 APTs, DPTs (except KX-T7600 series), and DSS consoles (except KX-T7600
series) are connected.
•
More than 4 CSs are connected.
•
An MEC card is required to support a configuration with a total MEC figure exceeding 28.
Note
For how to connect an AC adaptor or additional AC adaptor, refer to "2.11.1 Starting the Hybrid IP-
PBX".
30
Installation Manual
Great user manuals database on
UserManuals.info