•
Noise is frequent while using
the PS.
•
Conversations disconnect
while using the PS.
•
PS stays out of service
when the CS status is
changed from Out of
Service to In Service.
Great user manuals database on
PROBLEM
•
•
•
UserManuals.info
PROBABLE CAUSE
Call handover is not
working while using the PS.
PS is out of CS coverage
area.
It may take about 10 s for
CS to start up after the
status has been changed to
In Service.
4.1 Troubleshooting
SOLUTION
•
Locate the CS properly (refer to "2.7.5
Site Survey" ).
•
Wait until the CS starts up.
Installation Manual
143