Configuring Record Control - Honeywell HDZ402LIWV User Manual

40X ZOOM IR PTZ DOME CAMERA USER GUIDE
number of the FTP server.
3. In the Username and Password fields, enter the user name and
password of the server.
4. In the Remote Directory field, enter the directory on the server where the
recorded video/snapshot files will be stored.
5. Click Save to apply the settings.
Panic Save
To save recorded video/snapshots to the camera's microSD card when
the network connection to the FTP is offline or unavailable, select the
Panic Save (Local) check box, and then click Save to apply the setting.
Configuring an NAS Disk for Storage
On the NAS tab, you can enable network attached storage and configure
storage settings.
To enable network attached (NAS) storage:
1. Select the Enable check box.
2. In the Server Address field, enter the address of the NAS server.
3. In the Remote Directory field, enter the directory on the server where the recorded
video/snapshot files will be stored.
4. Click Save to apply the settings.

Configuring Record Control

You can configure recording settings on the Setting  Storage  Record
Control page.
By default, recorded video files are 8 minutes or 30 minutes long (depending
on your camera model). To change this setting, enter a time between 1 and
120 minutes in the Record Length field.
82