c.
You can define up to 4 motion detection profiles (regions), each with different
sensitivity and threshold settings. Next to Region, click one of the solid color
tiles to select a region. Drag the Sensitivity and Threshold sliders to the
desired values.
Sensitivity measures the amount of change in a scene that qualifies as
motion. Threshold measures the amount of motion in a scene required to
trigger a motion detection event.
d. Click Save to apply the settings.
6. To start recording video when motion is detected, ensure that the Record check
box is selected.
7. In the Record Delay field, enter the number of seconds that the system will
continue to record video after the event has ended. Enter a value between 10 and
300.
8. To generate an alarm output when motion is detected, select the Alarm Output
check box and select the alarm output(s) to be activated.
9. In the Alarm Delay field, enter the number of seconds that the system will
continue to generate an alarm output after the event has ended. Enter a value
between 10 and 300.
10. To send an email notification when motion is detected, select the Send Email
check box. Email settings must be configured in Setting Network SMTP
(Email).
11. To initiate a predefined preset, tour, or pattern when motion is detected, select
the PTZ check box and select the desired action from the Activation list.
12. To take a snapshot when motion is detected, select the Snapshot check box.
For the snapshot to be attached to the email notification, the Attachment
check box must be selected in Setting Network SMTP(Email).
Note
13. Click Save to apply the settings.
40X ZOOM IR PTZ DOME CAMERA USER GUIDE
55