Table of Contents
Advertisement
40X ZOOM IR PTZ DOME CAMERA USER GUIDE
To enable motion detection:
1. Select the Enable check box.
2. Next to Alarm Period, click Setting. The Alarm Period window opens.
3. Set the days and times when you want the alarm function to be active, and then click
save.
4. In the Anti-Dither field, enter the anti-dither time in seconds. Enter a value
between 0 and 100 seconds. The system will only allow one motion detection
event within this period.
5. Set up motion detection areas:
a.
Next to Area, click Setting. The Area window opens.
b. By default, the whole video window is configured as a motion detection area.
To define a smaller area, drag your mouse over the area(s) that you want to
deselect, or click Remove All, and then redraw the area(s) with your mouse.
54
Advertisement
Table of Contents
