Yamaha R15 Owner's Manual page 26

Instrument and control functions
There are two display mode: "AVE_ _._
km/L" and "AVE_ _._ L/100 km".
To switch the average fuel consump-
tion display between "AVE_ _._ km/L"
and "AVE_ _._ L/100 km", push the
"SELECT" button for one second.
 "AVE_ _._ km/L": The average dis-
tance that can be traveled on 1.0 L
4
of fuel is shown.
 "AVE_ _._ L/100 km": The average
amount of fuel necessary to travel
100 km is shown.
To reset the average fuel consumption
display, push and hold the "RESET"
button.
TIP
 After resetting the average fuel
consumption, "_ _._" will be
shown until the vehicle has trav-
eled 1 km.
The average fuel consumption
function should be used for gener-
al reference only. Do not use this
figure to estimate the distance
that can be traveled on the current
tank of fuel.
Average speed mode
1
ZAUE3354
1. Average speed display
Shows the vehicle's traveling speed
since it was last reset.
To reset the average speed display,
push and hold the "RESET" button un-
til the average speed flashes, and then
push the button again .
4-8
Shift timing indicator light
1
2
ZAUE3355
1. Shift timing indicator light
2. Brightness level display
The shift timing indicator light has four
settings which can be adjusted.
 Flashing pattern: this function al-
lows you to choose whether or not
the indicator light will come on and
whether it should flash or stay on
when activated.
 Activation point: this function al-
lows you to select the engine
speed at which the indicator light
is activated.
 Deactivation point: this function
allows you to select the engine
speed at which the indicator light
is deactivated.