Yamaha R15 Owner's Manual page 24

Instrument and control functions
Push the "RESET" button to switch
display backward.
If the last segment of the fuel meter
starts flashing, the display automati-
cally changes to the fuel reserve trip-
meter mode "TRIP F" and starts
counting the distance traveled from
4
that point. In that case, push the "SE-
LECT" button to switch the display be-
tween the various tripmeter, odometer,
clock, instantaneous fuel consump-
tion, average fuel consumption, and
average speed modes in the following
order:
TRIP F → CLOCK → km/L or L/100 km
→ AVE_ _._ km/L or AVE_ _._ L/100 km
→ AVE_ _._ km/h → ODO → TRIP 1 →
TRIP 2 → TRIP F
To reset a tripmeter, select it by push-
ing the "SELECT" button and then
push the "RESET" button for at least
one second.
If you do not reset the fuel reserve trip-
meter manually, it resets itself auto-
matically and the display returns to the
prior mode after refueling and traveling
5 km.
Odometer mode
1
ZAUE3349
1. Odometer
The odometer shows the total distance
traveled by the vehicle. It cannot be re-
set.
4-6
Tripmeters mode
1
ZAUE3350
1. Tripmeter
The tripmeters shows the total dis-
tance traveled since they were last re-
set.
To reset a tripmeter, push the "RESET"
button for one second.
TIP
 The odometer will lock at 999999
and cannot be reset.
 The tripmeters will reset and con-
tinue counting after 9999.9 is
reached. To reset the tripmeters,
while it is being displayed, press
the "RESET" button for at least
one second.