Table of Contents
Advertisement
Dual Range
<First range> Select the resolution, decimal point position and format.
<First range> Select the weighing range
<Second range> Select the resolution
<Second Range> Specify the weighing capacity
For the range function, refer to "5.3. Weighing Range Function".
Specifying the Range and Unit
Step 1
The range and unit of measure are displayed.
Range display :
Unit display:
ENTER
ESC
Specifying the Resolution, Decimal Point Position and Format
Step 2 The resolution will be displayed as d 0. 1 , with decimal point. Triangle 1 and the
first unit selected at the previous step will be displayed.
Specify the position of the decimal point with the
format (point or comma) with the +/- key. Specify the resolution with the
key.
The decimal point format, specified in this step, will only apply to the display. The
decimal point format for serial data output is selected using the F-function settings.
Press the
Using the
the next step without changing the parameters.
AD-4405A Weighing Indicator
5ingl : single range
dUal : dual range
To change the range function, use the
The active unit is displayed. The unit can be changed; such
as kg or lb. Calibration is performed with the displayed unit.
Press the
MODE
Press the +/- key to select a unit for calibration. The unit for calibration
(first unit) is displayed and the alternate unit (second unit) is blinking.
Stores the parameter displayed and proceed to the next step.
Proceeds to the next step without changing the parameter.
key to store the parameters and then proceed to the next step.
ENTER
key, regardless of what is displayed, the indicator will proceed to
ESC
key to select a unit.
Page 13
key
CLEAR
key. Specify the display
CLEAR
5.2. Calibration Procedure
MODE
Advertisement
Table of Contents
