Operation - Invacare G32 User Manual

Removing the Bed Rails
1. Remove the spacer B and knob A from the attaching
bracket C and set aside.
2. Slide the bed rail assembly (bed rail and attaching
bracket) toward the headboard to disengage the two "L"
brackets E of the attaching bracket C underneath the
second G and third H crossmembers.
3. While holding the bed rail, slide the attaching bracket
C toward the center of the bed disengaging the "T"
bracket K from the bed rail clamp J.
4. Remove the bed rail and attaching bracket from the bed
frame and set aside.
5. After removing the bed rails, re-assemble the individual
components to the bed rail for safe keeping.
• Knob A
• Spacer B
• Attaching Bracket C
• Bed Rail D
60105588-A

Operation

Usage
DANGER!
Risk of Death, Injury or Damage
To avoid entrapment, damage, and/or personal
injury:
– These bed rails are intended to prevent an
individual from inadvertently rolling out of bed.
DO NOT use for restraint purposes.
– DO NOT use the bed rails as push handles when
moving the bed.
1. To change the position of the rail, hold and raise/lower
the rail with one hand while pulling the adjustment knob
M outward with the other hand.
Ensure the adjustment knob is positioned properly in
the rail before releasing the rail.
7