Table of Contents
Advertisement
Programming the VIZIO Universal Remote Control
You can program the remote control to work with up to four (including TV) different pieces of equipment
including your VIZIO VO47L FHDTV30A . Listed below are the steps for programming your VCR or DVD,
Cable or Satellite Box and Audio Receiver/Amplifier.
Programming for Audio Receiver
1. Manually turn on the audio receiver.
2. Press the RCVR button on the remote control.
3. Press and hold the SET button until the LED LIGHT flashes twice. If it flashes 5 times replace the
batteries.
4. Find the programming code for your audio receiver in the code list in the back of this book and enter it
using the Number Buttons. If the code is accepted, the LED flashes twice after the last digit is
entered.
If the LED does not flash twice, repeat Steps 2 through 4 with the next code listed for the component
and manufacturer.
5. Point the remote control at the audio receiver and press the POWER button. The receiver will turn off.
Note:
a)
If your audio receiver does not respond, try all the codes for your audio receiver brand. If
the codes do not work, or your brand is not listed, see "Searching for Component Codes."
b)
Sometimes a code listed will only include limited functions. Try other codes that may
include more functionality.
Version 11/20/2008
VIZIO
71
www.VIZIO.com
®
VO47L FHDTV30A User Manual
Advertisement
Table of Contents
