Starting A Route By Using The Map; Starting A Route Using The Roadtrip Routes Feature; Going Home; Changing The Route Calculation Mode - Garmin RVCAM 795 Owner's Manual

Starting a route by using the map

You can start a route by selecting a location from the map.
1 Select View Map.
2 Drag and zoom the map to display the area to search.
3 If necessary, select
Location markers (coloured dots) appear on the map.
4 Select an option:
• Select a location marker.
• Select a point, such as a street, junction or address location.
5 Select Go!.

Starting a Route Using the RoadTrip Routes Feature

Your device can calculate routes that prefer bendy roads, hills and fewer motorways. This feature can provide a
more enjoyable drive but it may increase the time or distance to your destination.
1 Select Where To? > Categories.
2 If necessary, select a subcategory.
3 Select a location.
4 Select .
5 Use the slider to increase or decrease the length of your route.
6 If necessary, select
7 Select Go!.

Going home

The first time you start a route home, the device prompts you to enter your home location.
1 Select Where To? > Go Home.
2 If necessary, enter your home location.
Editing your home location
1 Select Where To? >
2 Enter your home location.

Changing the route calculation mode

1 Select > Navigation > Calculation Mode.
2 Select an option:
• Select Turn-by-Turn to calculate routes on streets that are faster to drive but can be longer in distance.
• Select Straight Line to calculate off-road, point-to-point routes in a straight line.
Following a route
to filter the displayed points of interest by category.
to add shaping points to your route.
> Set Home Location.
29