Table of Contents
Advertisement
Additional laundry can be added
into the machine during the End
Time countdown. At the end of the
countdown, End Time indicator
turns off, washing cycle starts and
the time of the selected programme
appears on the display.
6.10 Starting the Programme
a. Press Start / Pause button to start the
programme.
b. The Start / Pause button's light which
was off before starts to illuminate stead-
ily now, indicating that the programme
has started.
c. Loading door is locked. The door lock
symbol appears on the display after the
loading door is locked.
d. Programme follow-up indicator lights on
the display will show the current pro-
gramme step.
6.11 Loading Door Lock
There is a locking system on the loading
door of the machine that prevents opening
of the loading door in cases when the water
level is unsuitable.
"Door Locked" symbol appears on the dis-
play when the loading door is locked.
Opening the loading door in case of
power failure:
In case of power failure, you can
use the loading door emergency
handle under the pump filter cap to
open the loading door manually.
To avoid any water overflow before
opening the loading door, make
sure there is no water left inside the
machine.
a. Turn off and unplug the appliance.
b. Open the pump filter lid.
c. Pull down the loading door emergency
handle with a tool and release. Then
open the loading door.
d. If the loading door does not open then
repeat the previous step.
6.12 Changing the Selections After
Programme has Started
Adding laundry after the programme has
started:
If the water level in the machine is suitable
when you press Start/Pause button, the
door lock will be deactivated and the door
will open, allowing you to add garments.
The door lock icon on the display goes off
when the door lock is deactivated. After
adding garments, close the door and press
Start/Pause button once again to resume
the washing cycle.
EN / 29
Advertisement
Table of Contents
