Functions/Programmes Selec - Beko CM 9101 BB User Manual

ferences in time increases and decreases.
In case the FAST or INTENSIVE led is not
lit, the appropriate programme duration is
shown for your normally soiled clothes/
laundry.
Depending on the programme selection,
the Intensive feature can be selected auto-
matically. In this case, the Intensive LED on
the panel will be lit. You can use the Intens-
ive selection to achieve a better washing
performance when washing heavily soiled
laundry.
You can reduce the time for your lightly
soiled laundry by pressing the Fast/Intens-
ive button in the programmes which come
with intense being selected. When you
press the button once, the LED will turn off
and you will reach the appropriate pro-
gramme duration for your normally soiled
clothes/laundry. When you press the same
button a second time, the fast LED will light
up, the time will decrease a little and it will
show the minimum programme duration,
which is suitable for your less soiled laun-
dry. The duration of programmes may
shorten by 50% when this function is selec-
ted. While the duration shortens, due to op-
timized washing steps, mobility and op-
timum water consumption of the high
mechanics, high washing performance is
achieved.
• Buhar
This function helps to reduce the creases of
your cotton, synthetic and mixed clothes,
shorten the ironing time and remove the dirt
by softening.
* Under conditions where the steam func-
tion is applied at the end of the programme,
your laundry may be warmer at the end of
the washing. This is expected within the
programme working conditions.
When you activate the steam func-
tion, do not use liquid detergent if
there is no liquid container or liquid
detergent dosing feature. There is
the risk of staining of the clothes.
6.8.2 Functions/Programmes Se-
lected by Pressing the Func-
tion Keys for 3 Seconds
• Anti-Crease+
This function is selected when the relevant
Auxiliary function button is pressed and
held for 3 seconds and the programme
follow-up light for the relevant step turns on.
When the function is selected, the drum
rotates for up to 8 hours for preventing the
laundry from creasing at the end of the
programme. You can cancel the
programme and take your laundry out at
any time during the 8-hour duration. Press
the function selection key or the machine
on/off key to cancel the function. The
programme follow-up light will remain on
until the function is cancelled or the step is
complete. If the function is not cancelled, it
will be active in the sub-sequent washing
cycles as well.
• Extra Water
This function can be selected by pressing
and holding the related auxiliary function
button for 3 seconds.
This function allows you to wash with plenty
of water and rinse your laundry in all the
programmes indicated as selectable in the
Programme and Consumption table. Use
this function for delicate laundry that
creases easily.
When you select this function, load
your machine with half of the max-
imum load specified in the pro-
gramme table.
• Child Lock
Use Child Lock function to prevent children
from tampering with the machine. Thus you
can avoid any changes in a running pro-
gramme.
EN / 27