Installation; Safety Instructions For Installation - Miele ProLine CS 1212-1 Operating And Installation Instructions

Installation

Safety instructions for installation


Risk of damage from incorrect connection.
Incorrect installation can cause damage to the ProLine element.
The ProLine element must only be installed by a qualified person.

Risk of electric shock from mains voltage.
Incorrect connection to the mains supply may result in an electric shock.
The ProLine element must be connected to the electrical supply by a qualified
electrician only.

Damage from falling objects.
Take care not to damage the ProLine element when fitting wall units or a cooker
hood above it.
Fit the wall units and the cooker hood before the ProLine element.

The veneer or laminate coatings of worktops (or adjacent kitchen
units) must be treated with 100 °C heat-resistant adhesive which will
not dissolve or distort. Any backmoulds must be of heat-resistant
material.

The ProLine element must not be installed over a fridge, fridge-
freezer, freezer, dishwasher, washing machine, washer-dryer or
tumble dryer.

This ProLine element must not be installed above cookers and
ovens unless these have a built-in cooling fan.

When installing the ProLine appliance, make sure that the mains
connection cable cannot come into contact with hot appliance parts.

After installation, the mains connection cable of the ProLine appli-
ance must not come into contact with any moving kitchen compon-
ent (e.g. a drawer) or be subject to mechanical loads which could
damage it.

Observe carefully the safety clearances listed on the following
pages.
42