Table of Contents
Advertisement
Thanks to serialization, every valve and every relevant valve
component such as the body, actuator or diaphragm, and
even automation components, can be clearly traced and read
using the CONEXO pen RFID reader. The CONEXO app, which
can be installed on mobile devices, not only facilitates and im-
proves the "installation qualification" process, but also makes
the maintenance process much more transparent and easier
to document. The app actively guides the maintenance techni-
cian through the maintenance schedule and directly provides
him with all the information assigned to the valve, such as
test reports, testing documentation and maintenance histor-
ies. The CONEXO portal acts as a central element, helping to
collect, manage and process all data.
For further information on GEMÜ CONEXO please visit:
www.gemu-group.com/conexo
In the corresponding design with CONEXO, this product has
an RFID chip (1) for electronic recognition. The position of the
RFID chip can be seen below.
Installing the RFID chip
RFID chip
4.5 Product label
Device version
Design in accordance with order data
Item number
Traceability number Serial number
The manufacturing month is coded under the traceability
number and can be requested from GEMÜ. The product was
manufactured in Germany.
www.gemu-group.com
Device-specific data
7 / 20
5 Correct use
Improper use of the product
▶ Risk of severe injury or death.
▶ Manufacturer liability and guarantee will be void.
Only use the product in accordance with the operating
●
conditions specified in the contract documentation and in
this document.
The products must:
•
only be used for measuring the flowmeters of the GEMÜ
800, GEMÜ 840 and GEMÜ 850 series.
•
only be operated within the performance limits.
•
not be modified from a constructional point of view.
The product is not intended for use in potentially explosive
areas.
5 Correct use
WARNING
GEMÜ 127x
Advertisement
Table of Contents
