Table of Contents
Advertisement
Installation and Configuration
SCSI Cable and Terminator Requirements
If the SuperLoader is the last device on the SCSI bus you must attach a terminator
to the SCSI connector on the back panel of the SuperLoader. There must be a
terminator on each end of the SCSI bus. Typically, the host adapter provides the
front-end termination.
SCSI Cable Length
LVD SCSI configurations have a maximum allowable bus length of 39.4 feet
(12 meters). To determine the cable length of the bus, measure the lengths of the
SCSI cables connecting each device to that bus and add those lengths together for
the total length. To that total length, add 16 inches (40.64 cm) for the internal
SCSI cable length.
Accessories
The following accessories are shipped with each SuperLoader:
10
Installation poster
SCSI host cables
RJ-45 Ethernet cable, 10 foot (3.048 meter)
SCSI terminator
Hardware brackets to rackmount the SuperLoader
1 magazine
1 magazine blank
1 data cartridge
Power cord
Rackmount template
Documentation CD (documents in PDF format)
1/16 Tape SuperLoader Reference Guide
Advertisement
Table of Contents
