Digital Video Cassette Technology
Notice that the Recording Log in the Deck Controller window has changed.
14.
Figure 129 Deck Controller Window
An elapsed time counter has appeared to the right of Recording Log and an
15.
entry has been added to the Recording Log. In this example the information
indicates:
•
•
Continue recording for about 30 seconds.
16.
Hold down the Shift key and click the Down Arrow in the Editing window.
17.
Notice the data changes by 10h. Also notice that another entry is added to
the Recording Log. Continue recording for about 30 seconds.
Again hold down the Shift key and click the Down Arrow in the Editing
18.
window. Continue recording for about 30 seconds.
Repeat the above step two times. There should be five entries in the
19.
Recording Log.
Then click the OK button in the Editing window. The Information window
20.
appears.
Click the OK button in the Information window.
21.
Close the Adjustment Utility window.
22.
Open the Inspector window. Select the Error Rate tab.
23.
86
The elapsed time
The mechanism mode,
the tape position and the
Head Record Current data
(for example) 00h:00m:06s
(for example) REC
028:33:15
C0