Table of Contents
Advertisement
3.4.4 BMC Tools
KCS Control
Select this KCS interface state after POST end. If [Enabled] us selected, the BMC will
remain KCS interface after POST stage. If [Disabled] is selected, the BMC will disable KCS
interface after POST stage
Restore AC Power Loss
This allows you to set the power state after an unexpected AC/power loss. If [Power Off]
is selected, the AC/power remains off when the power recovers. If [Power On] is selected,
the AC/power resumes and the system starts to boot up when the power recovers. If [Last
State] is selected, it will recover to the state before AC/power loss.
Restore AC Power Current State
This allows you to restore AC Power Current State.
Load BMC Default Settings
Use this item to Load BMC Default Settings
58
Advertisement
Table of Contents
