Advertisement
NOTE
If the START/STOP button is not pressed
a second time to stop, dispensing will
automatically stop after 60 seconds.
NOTE
Always ensure the correct sized cup/glass is
placed under the spout to collect the selected
volume of dispensed water.
COLD Water in Operation
1. Turn the FUNCTION dial to your desired
temperature, press the START/STOP
button once. The
Cooling LED light will
illuminate to indicate that the compressor is
on and is reaching the set temp.
2. Once the unit has reached the set temp, the
READY LED light will illuminate white.
3. The unit is now ready to dispense filtered
chilled water at the set temperature.
4. Press START/STOP
5. button and the unit will start dispensing
filtered cold water, and the water droplet
icon will illuminate white while water is
dispensing.
NOTE
START/STOP button can be pressed to
dispense water before the unit reaches the set
temperature, however, the water dispensed will
not be at the set temperature.
6. Once the desired amount of water has been
dispensed, press START/STOP button
again to stop dispensing. The unit will beep,
the water droplet light will turn off and the
unit will return to standby mode.
16
NOTE
If the START/STOP button is not pressed
a second time to stop, dispensing will
automatically stop after 60 seconds.
NOTE
Always ensure the correct sized cup/glass is
placed under the spout to collect the selected
volume of dispensed water
Advertisement
