Download Print this page

Table Of Contents; General Information - Ferris Snapper Pro EZ Dump X Operator's Manual With Setup Instructions

Grass collection systems 12 cu. ft. & 14 cu. ft. hopper

Advertisement

Table of Contents

General Information ........................................... 2
Safety Rules & Information ............................... 3
Installation ........................................................... 4
General Operating Instructions ...................... 16
Hopper Removal ............................................... 18

GENERAL INFORMATION

Thank you for purchasing this quality-built Ferris or Snapper Pro product. We're pleased that you've placed your
confidence in the Ferris or Snapper Pro brand. When operated and maintained according to the instructions in
this manual, your Ferris or Snapper Pro product will provide many years of dependable service.
This manual contains safety information to make you aware of the hazards and risks associated with this
machine and how to avoid them. This machine is designed and intended to be used and maintained according
to the manual for finish cutting of established lawns and is not intended for any other purpose. It is important that
you read and understand these instructions thoroughly before attempting to start or operate this equipment.
These setup instructions are to be done in addition to the Blower, Blower Mount and Weight Mount Installation
instructions included in the Turbo-Pro Max or Fast-Vac Grass Collection System instructions included with the
blower mount.
You must observe and obey all safety instructions in the Turbo-Pro Max or Fast-Vac Grass Collection System
instructions along with any safety instructions included in this manual.
The illustrations in this manual are representative and may not exactly match your unit.
DATE PURCHASED
Briggs & Stratton Power Products Group, LLC.
Copyright © 2015 Briggs & Stratton Corporation
Milwaukee, WI, USA. All rights reserved.
FERRIS is a trademark of Briggs & Stratton
Corporation Milwaukee, WI, USA.
SNAPPER PRO is a trademark of Briggs & Stratton
Corporation Milwaukee, WI, USA.
2
Contact Information:
Briggs & Stratton Power Products Group, LLC.
5375 N. Main St.
Munnsville, NY 13409-4003
(800) 933-6175
www.ferrisindustries.com
www.snapperpro.com
www.ferrisindustries.com | www.snapperpro.com

Advertisement

loading

This manual is also suitable for:

Snapper pro ez dump xl