Advertisement
General Operating Instructions
Installing the Weight Carrier and Front
Weights
It is important that weight carrier and front weights are
installed whenever the collection system is mounted
on your unit.
The instructions for installing the weight carrier and
front weights are detailed in the Fast-Vac or Turbo-
Pro Max Grass Collection System manual that was
included with the blower mount for this machine.
GENERAL OPERATING
INSTRUCTIONS
In addition to these operating instructions, you must
also observe and follow the operating instructions that
are detailed in the Fast-Vac or Turbo-Pro Max Grass
Collection System manual included with the Blower
Mount.
Operating the Latch Release Lever
Dumping the Hopper
1. Press the handle down, squeeze the latch release
lever (A, Figure 31) and raise the handle up to tilt
the hopper backwards, open the gate and dump
out the contents of the hopper.
Closing the Hopper
1. Push the handle down to position the hopper back
in the operating (collecting) position.
16
Figure 31. Operating the Latch Release lever
WARNING
Thrown Objects Hazard
• Objects thrown by the mower can seriously
injure or kill you.
• Do NOT open the hopper while the mower
blades are turning.
• Do NOT operate the mower with the complete
catcher in place.
www.ferrisindustries.com | www.snapperpro.com
A
Advertisement
