Desktop And Wall Mount Installations; Connecting Your Telephone; Choosing A Location - Clarity XL50 User Manual

Connecting your Telephone

1. Carefully remove your telephone from its box. If there
is any visible damage, do not attempt to operate this
equipment. Return it to the place of purchase.
2. Check to be sure that you have all items that come
with your XL50 telephone. You should have a Hand
set, Base Unit, AC Adapter, Mounting Bracket, Han dset
Line Cord, and Telephone Line Cord.

Choosing a Location

• The XL50 requires a modular phone jack and a
standard 120 Volt outlet for operation.
• The unit should be located in an area where it is easy
to see the visual display and lighted ringer.
• Choose a location that is out of the way of normal
activities.
• The unit can be used as a desk top phone or wall
mount phone.
CAUTION:
Always connect the AC adapter to the phone
before you connect it to the AC power. When you finish,
disconnect the AC power before you disconnect it from
the telephone.
Desk Mounting Instructions
Follow these instructions to place the phone on a desk or
table top using the supplied bracket.
1. Plug one end of the long flat telephone line cord into
the jack marked LINE located on the back of the
telephone. Plug the other end into the telephone wall
jack. See Figure 2
2. Insert the plug of the AC adapter into the jack marked
DC 9V located on the back of the base unit. Then plug
AC adapter into wall outlet. See Figure 2.
GETTING STARTED
1
2
Figure 2
15