Maintenance Fundamentals
Pre-ride Inspection
To ensure safety, it is your responsibility to
perform a pre-ride inspection and make sure
that any problem you find is corrected. A pre-
ride inspection is a must, not only for safety, but
because having a breakdown, or even a flat
tyre, can be a major inconvenience.
Check the following items before you get on
your vehicle:
Fuel level - Fill fuel tank when necessary
●
P. 46
2
Throttle - Check for smooth opening and
●
full closing in all steering positions
Engine oil level - Add engine oil if necessary.
●
Check for leaks
Coolant level - Add coolant if required.
●
Check for leaks
56
P. 91
2
P. 79
2
P. 81
2
Drive chain - Check condition and slack,
●
adjust and lubricate if necessary
Brakes - Check operation;
●
Front and Rear: check brake fluid level and
pads wear
P. 83,
2
2
Lights and horn - Check that lights,
●
indicators and horn function properly
Engine stop switch - Check for proper
●
function
P. 40
2
Clutch - Check operation;
●
Adjust freeplay if necessary
GS, FO, MA, U type
●
Side stand ignition cut-off system - Check
for proper function
Wheels and tyres - Check condition, air
●
pressure and adjust if necessary
P. 87
2
P. 84
P. 88
2
P. 86
2
P. 64
2