Clarity RC100 Operating Instructions Manual page 16

•
Voice Activated answering
•
is off, (RC200 only).
Ring volume set to Hi.
Press 0 on the keypad to
2
turn it off; or Press 1 key on
the keypad to turn it on.
Press 0 key to turn it off; or
2
Press 1-9 keys to turn it on. See
Page 5 for rate selection guide.
Press MUTE twice.
2
Press HEADSET twice.
2
Press FLASH/PAUSE twice.
2
Dial the number (up to
2
40 digits).
Dial the number.
2
The number is dialed in
2
7 seconds.
When the desired directory
2
location is lit, press it again.
The first number stored
2
under M1 is dialed.
Press ON/OFF button to hang up.
2
Press Remote Transmitter once to hang up.
2
It hangs up automatically after one minute of silence or when it detects dial tone.
2
•
Unanswered call indicator is
•
on.
"0" (operator) is programmed into
the first memory location of M1.
Press SCAN button.
3
Press SCAN button.
3
Select the memory button. Press once for first location, or
3
twice for second location.
Press ON/OFF button to hang up.
3
Press Remote Transmitter to hang up.
3
Press Remote Transmitter once to
3
hang up.
•
Voice Mail indicator is off,
•
(RC200).
Remote Flash switch is off,
(RC200 only).
11