Reversing The Door Swing - GE GTH20SBBSS Owner's Manual & Installation Instructions

INSTALLING THE WATER LINE
PLUG IN THE REFRIGERATOR
11
Arrange the coil of tubing so that it does not vibrate
against the back of the refrigerator or against the
wall. Push the refrigerator back to the wall.

REVERSING THE DOOR SWING

IMPORTANT NOTES
When reversing the door swing:
Read the instructions all the way through before
starting.
IMPORTANT: Once you begin,do not move the
These instructions are for changing the hinges from
the right side to the left side —if you ever want to
change the hinges back to the right side, follow these
same instructions and reverse all references to left and
right.
Once door swing is finalized, ensure the logo badge
door by removing the adhesive cover on the back
side.
NOTE:
Unplug the refrigerator from its electrical outlet.
Empty all door shelves, including the dairy
compartment.
16
Installation Instructions
(CONT.)
START THE ICEMAKER
12
Power switch models –
switch to the I (on)
not begin to until it reaches its
of 15°F (–9°C) or below. It will then
begin automatically if the icemaker
switch is in the I (on)
green light will come
Power
Switch
Green Power
Light
Power switch model
TOOLS YOU WILL NEED
Adjustable Wrench
Masking Tape
Phillips Screwdriver
the icemaker
The icemaker will
and the
Icemaker
Feeler Arm
5/16" Socket
Ratchet Driver
Thin-blade Screwdriver
Torx T-20 Driver