GE GFSS2HCYSS Owner's Manual And Installation Instructions page 28

REMOVING THE DOORS
REMOVE THE REFRIGERATOR DOORS
1
(cont.)
Remove the tape and tilt the door away from
E
the cabinet. Lift the door off the center hinge
pin. Ensure that the plastic hinge pin thimble
remains on the hinge pin or inside door hinge
pin hole located in the bottom of the door.
F Set the door on a non-scratching surface with
the inside up.
REMOVE CENTER HINGE
2
Using a 5/16" socket ratchet/driver, remove the
bolts securing the center hinge to the cabinet.
Set the hinge and bolts aside.
REMOVE OPPOSITE DOOR
3
Follow the same procedure on the opposite
door. There are no center hinge covers on the
opposite side.
REMOVE FREEZER DRAWER
4
Refer to the Removing the Freezer Drawer
section for instructions.
Installation Instructions
(Double Door Refrigerator Models only) (cont.)
28