Table of Contents
Advertisement
Customizing items in the Basic Measurement Screen (BMS)
To customize the items that are displayed on the DSP1, DSP2, and DSP3 screens:
1.
2.
3.
4.
Except for the (none) item, you cannot display the same item on more than one line of the same screen.
The items displayed in the DSP1, DSP2, DSP3, and DSP4 screens are also used in the corresponding
Stakeout screens (SO2, SO3, SO4, and SO5).
You can also customize the displayed items in Stakeout.
Header characters
The following header characters can be used in DSP screens:
•
A colon (:) indicates that tilt correction is applied to the value.
•
A hash symbol (#) indicates that tilt correction is off.
•
An underscore (_) under the tilt correction character indicates that Sea
Level Correction or Scale factor is applied.
[MODE] key
Use the
Changing input mode while entering points or codes
When the cursor is in a point (PT) or code (CD) field,
press
[MODE]
alphanumeric (
The input mode indicator in the status bar changes to
show the current input mode.
When the cursor is in a height (HT) field, only numeric input mode is available. Pressing [MODE] has no effect
when the cursor is in a HT field.
Hold down
for one second.
[DSP]
Use the arrow keys
,
[^]
the item that you want to change.
Use the
and
softkeys to scroll through the
list of items that can be displayed for this item.
The items that you can choose from are HA, AZ,
HL, VA, V%, SD, VD, HD, Z, and (none).
To save your changes, press the
item for DSP3 and press
selected.
key to change the keyboard mode for the current screen.
[MODE]
to change the input mode between
) and numeric (
A
,
, and
to highlight
[v]
[<]
[>]
softkey. Alternatively, highlight the last
Save
. The DSP screens show the items you have
[ENT]
).
1
Field Station NPL-632 Instruction Manual
Getting Started
3
37
Advertisement
Table of Contents
