Table of Contents
Advertisement
[MODE] key
Use the
Changing input mode while entering points or codes
When the cursor is in a point (PT) or code (CD) field,
press
[MODE]
alphanumeric (
The input mode indicator in the status bar changes to
show the current input mode.
When the cursor is in a height (HT) field, only numeric input mode is available. Pressing [MODE] has no effect
when the cursor is in a HT field.
Quick code measurement mode
1.
2.
key to change the keyboard mode for the current screen.
[MODE]
to change the input mode between
) and numeric (
A
To activate Quick code measurement mode,
press
in the BMS.
[MODE]
The PT field shows the default point name.
Press any numeric key (
measuring and recording points.
A list of the numeric keys and their assigned
feature codes appears on the right side of the
screen.
For example, when you press
assigned to 6 is selected, and the instrument
starts a measurement.
).
1
through
) to start
[0]
[9]
, the code
[6]
Nikon N Series/K Series Total Station Instruction Manual
Getting Started
3
35
Advertisement
Table of Contents
