Table of Contents
Advertisement
3
Getting Started
Header characters
The following header characters can be used in DSP screens:
•
A colon (:) indicates that tilt correction is applied to the value.
•
A hash symbol (#) indicates that tilt correction is off.
•
An underscore (_) under the tilt correction character indicates that Sea
Level Correction or Scale factor is applied.
[MODE] key
Use the
Changing input mode while entering points or codes
When the cursor is in a point (PT) or code (CD) field,
press
alphanumeric (
The input mode indicator in the status bar changes to
show the current input mode.
When the cursor is in a height (HT) field, only numeric input mode is available. Pressing [MODE] has no effect
when the cursor is in a HT field.
Quick code measurement mode
1.
2.
3 6
Total Station NPL-322 Instruction Manual
key to change the keyboard mode for the current screen.
[MODE]
to change the input mode between
[MODE]
) and numeric (
A
To activate Quick code measurement mode,
press
in the BMS.
[MODE]
The PT field shows the default point name.
Press any numeric key (
measuring and recording points.
A list of the numeric keys and their assigned
feature codes appears on the right side of the
screen.
).
1
through
) to start
[0]
[9]
Advertisement
Table of Contents
