Installing System Memory Modules - AOpen i55HMt-HD Manual

2.5 Installing Memory Module
The motherboard provide SODIMM type memory support. There're two
SODIMM memory slots which motherboard provided. The installation of
memory module as below.
1. Put the memory module with correct direction. Notice there's one stick to
make sure direction is correct.
2. Plug in memory module into SODIMM slot with angle 20~30º. Make sure
memory moule plug into slot completely.
3. There're tabs which located in the side of SODIMM holder. Use fi nger to
push memory module vertically until the tabs lock memory module tightly.
4. Now, the memory modules have been plugged properly with horizontal fl at.
1
3
Pay careful attention to align the slot in the middle of the memory module.
Note:
The tabs of the DIMM slot will clip to hold the DIMM in place when the DIMM
touches the slot's bottom. You can hear it click into place.
Stick
30º
2
4
12
Tab