Table of Contents
Advertisement
2.3 Installing CPU Cooler
1. Remove the four screws of the CPU heatsink and take the bracket from
heatsink.
2. Tear off the label from bracket for easily pasted on the bottom of main board.
3. Place bracket properly on the back side as picture.
4. Smear over the thermal compound under the center of heatsink smoothly
and let it be well mixed.
5. Please follow concave of direction on bottom of heatsink, Put the CPU Fan &
heatsink on the processor and lock the four screws of the heatsink with
bracket (on the MB back side). Please make sure the screws are well tied
between the motherboard and heatsink.
Warning:
1
4
1
3
Note:
This cooler and picture shown might be different from your purchased product.
Always use the correct amount of thermal grease when mounting
the CPU cooler. Follow the instructions closely.
2
4
2
3
10
Advertisement
Table of Contents
