Engine Oil Change - Westinghouse WGen12000c User Manual

Check the engine oil level before each use or every 8
hours of operation.
Place the generator on a level surface and allow the
engine to cool for several minutes.
Remove the oil dipstick and wipe the dipstick clean.
Insert, then remove the oil dipstick.
engine oil incrementally and recheck until the level is at
top notch on the dipstick, drain the oil to reduce the oil
level to the full mark.

ENGINE OIL CHANGE

When using the generator in dusty conditions or extremely
hot weather, change the oil more frequently. Change the
oil while the engine is still warm from operation.
Place the generator on a level surface and allow the
engine to cool for several minutes.
Place an oil pan (or suitable container) under the oil
drain.
MAINTENANCE
Remove oil drain bolt and allow the oil the to drain.
Replace oil drain bolt.
by rotating it counterclockwise. Allow the oil to drain
the engine.
Install by hand, turning clockwise until the seal contacts
the engine then turn another 3/4 turn. DO NOT over
tighten.
Fill with the recommended oil. Stop frequently to check
the excess oil may get transferred to the air cleaner
is running.
1.7 Quart (1.6 Liter)
Westinghouse Outdoor Power Equipment | 23