Other Handy Functions - Clarion RMX855Dz Owner's Manual

Other Handy Functions

Setting the clock
1. Press and hold ADJ button 4 for 1 second or
longer to switch to the adjustment selection display.
2. Press the right or left side of SEARCH button
% to select "CLOCK".
3. Press ENT button 2.
4. Press the right or left side of SEARCH button
% to select the hour or the minute.
5. Tur n the Rotar y knob & clockwise or
counterclockwise to set the correct time.
The clock is displayed in 12-hour format.
6. Press ENT button 2 to store the time into memory.
7. Press ADJ button 4 to return to the previous mode.
Note:
• You cannot set the clock when it is displayed with
only the ignition on. If you drain or remove the car's
battery or take out this unit, the clock is reset. While
setting the clock, if another button or operation is
selected, the clock set mode is canceled.
Dimmer level setting
You can reduce the display illumination linked to
the car illumination.
The factory default setting is "LEVEL 3".
1. Press and hold ADJ button 4 for 1 second or
longer to switch to the adjustment selection display.
2. Press the right or left side of SEARCH button
% to select "DIMMER LV".
3. Press ENT button 2.
4. Tur n the Rotar y knob & clockwise or
counterclockwise to set the dimmer level.
Choose the dimmer level from the following.
"OFF", "LEVEL 1", "LEVEL 2", "LEVEL 3",
"LEVEL 4", "LEVEL 5".
LEVEL 1 to LEVEL 5:
The greater the dimmer level is, the more the
illumination is reduced.
OFF:
Even if the car illumination is turned on,
reduction of the display illumination does not
occur.
5. Pressing ENT button 2 returns to the
adjustment selection display.
6. Press ADJ button 4 to return to the previous mode.
Entering titles
Titles up to 10 characters long can be stored in
memory and displayed for radio stations and
CDs. The numbers of titles that can be entered
for each mode are as follows.
16
RMX855Dz
Mode
Radio mode
TV mode
CD changer mode
CDC655z connected
CDC655Tz connected
CDC1255z connected
1. Press FNC button 3 to select the mode you want
to enter a title. (radio, CD changer or TV)
Titles cannot be entered for MDs with this unit.
2. Select and play a CD in the CD changer or tune
to an appropriate TV or radio station.
3. Press DISP button ! and display the subtitle.
4. Press TITLE button 4. "TITL" appears in the
display and the cursor position flashes.
5. Press the right or left side of SEARCH button
% to move the cursor.
6. Press DISP button ! to select a character.
Each time you press DISP button !, the
character changes in the following order:
Capital letters Small letters
Symbols Umlaut
7. Turn the Rotary knob & to select the desired
character. Turning the Rotar y knob &
clockwise moves the cursor to the next
character; turning it counterclockwise moves
the cursor to the previous character.
8. Repeat steps 5 to 7 to enter up to 10
characters for the title.
9. Press and hold ENT button 2 for 2 seconds
or longer to store the title into memory and
cancel title input mode.
Clearing titles
1. Play a CD in a CD changer or tune a radio
station or TV station that you want to clear
the title for.
2. Press DISP button ! and display the subtitle.
3. Press TITLE button 4. "TITL" appears in the display
and the display switches to the title input display.
4. Press BND button #.
5. Press and hold ENT button 2 for 2 seconds or
longer to clear the title and cancel the title input
mode.
Adjusting the display contrast
You can adjust the display contrast according to
the angle of installation of the unit.
Number of titles
30 titles
15 titles
Number of titles
60 titles
100 titles
50 titles
Numbers
Capital letters...